Honeywell ST 3000 Installation Guide

5.1 Wiring Diagrams and Dimension Drawings, Continued
Dimension Drawings – Series 100 and Series 900, Continued
Transmitter Type and Table Mounting Drawing
Key Number Selections
Number
Flange Mount
STF128, STF132 Table II (Flush)
0_1F0, 0_2F0, 0_3F0
– 51500404
Table II (Extended)
0_5_0
– 51500405
Table I Z_ _ (Sanitary)
Table II 0S0_0
– 51500418
STF924, STF932 Table II (Flush)
0_1F0, 0_2F0, 0_3F0
– 51500406
Table II (Extended)
0_5_0
– 51500407
Table I Z_ _ (Sanitary)
Table II 0S0_0
– 51500419
STF12F, STF13F – – 51500420
STF92F, STF93F – – 51500421
STF14F – Tank HTG 30756436-000
30755981-000
STF14T (High Temperature) ½, 1, 1 ½, and
2-inch Flange
– 51404481
Flush Mount
STG93P – – 51404716-000
For ST3000 Transmitter Revision “S” (ie STF128 S, STF12F S) or greater
Transmitter Type and Table Mounting Drawing
Key Number Selections
Number
CFF Flange Mount
Table II
- -1- -, - - 2 - -, - - 3 - -
Flush Flange Mount 50008473 STF128, STF132, STF 924,
STF 932
Table II
- - 5 - -
Extended Flange Mount 50008475
STF12F, STF13F, STF14F,
STF92F, STF93F
Table II
- T - -, - R - -, -P - -
Pseudo Flange Head Mount 50008474
48 ST 3000 Release 300 Installation Guide 2/05

Honeywell ST 3000 Specifications

General

Manufacturer	Honeywell
Category	Transmitter
Stability	±0.01% of URL per year
Operating Temperature	-40 to 85°C (-40 to 185°F)
Communication Protocol	HART
Housing Material	Aluminum or Stainless Steel
Enclosure Rating	IP66/67, NEMA 4X
Measurement Type	Gauge, Absolute, Differential
Output Signal	4-20 mA, HART
Process Temperature	-40 to 121°C (-40 to 250°F)
Hazardous Area Approvals	FM, CSA, ATEX, IECEx
Process Connection	1/2" NPT
Material	316L Stainless Steel, Hastelloy C