CERTIFICATION
Touchpoint Pro
Pt. No. 2400M2566_1_EN 78 Operating Manual
14.2 National and International Certificates for Zone 2 Div. 2
The TPPR Zone 2 Div. 2 Systems and System Components hold the following National and International Certificates and
Certification Codes:
Remote Wall Mount Zone 2/Div. 2 Enclosure and ROM (ATEX/IECEx)
(ROM) Tamb –40 °C to +70 °C
(Enclosure) Tamb –40 °C to +xx °C*
* See Rating Plate
Remote Wall Mount Zone 2/Div. 2 Enclosure and ROM (CSA US/CAN)
Class I, Zone 2, AEx nA nC IIC T4
Class I, Zone 2, Ex nA nC IIC T4
(ROM) Tamb –40 °C to +70 °C
(Enclosure) Tamb –40 °C to +xx °C*
AIM mA, AIM mV, DIM, RCM and Backplanes (ATEX/IECEx)
Tamb –40 °C to +70 °C
AIM mA, AIM mV, DIM, RCM and Backplanes (CSA US/CAN)
Class I, Zone 2, AEx nA IIC T4
Class I, Zone 2, Ex nA IIC T4
Tamb –40 °C to +70 °C
Remote Wall Mounted Zone 2/Div. 2 Enclosure
IECEx SIR15.0021X
IECEx SIR15.0015U
IECEx SIR15.0016U
IECEx SIR15.0017U
IECEx SIR15.0018U
IECEx SIR15.0019U
CSA 70025951
IECEx SIR15.0020U
Table 18. National and International Certificates
14.3 European Performance Approval (DEKRA Exam) for Systems
TPPR has been approved by DEKRA Exam for use in the measurement of oxygen as well as combustible and toxic gases.
The certification marking that is applied to the product is shown below:
Ex II (1) GD
BVS 16 ATEX G 002 X for EN 60079-29-1, EN 50104 and EN 50271
PFG 16 G 002 X for EN 50104, EN 45544-1/2/3 and EN50271