SAFE DISPOSAL
Touchpoint Pro
Pt. No. 2400M2566_1_EN 85 Operating Manual
16.3.5 TPPR Power Supply Units
• Casing – Back case: Aluminium; Top case (with mesh): Steel with Nickel plating
• Contents – printed circuit boards (PCB)
16.3.6 TPPR Ring Coupling Module
• Casing – Polyamide PA 6.6 V0 (UL94), green
• Contents – printed circuit boards (PCB)
16.3.7 TPPR Backplanes
• Backplane Assemblies (i.e. PCB)
16.3.8 TPPR Packaging
TPPR outer packaging will be cardboard for wall-mounted units and ISPM15 certified 19 mm solid (not machined) woods for
floor standing units. Facilities for recycling are widely available.
TPPR wall-mounted enclosure inner packaging is made from Stratocell
®
foam. The foam can be recycled and reused as
Stratocell
®
where such recycling facilities exist.
TPPR floor standing units may be shipped on ISPM15 certified wooden pallets that may be reused, recycled or returned.
Figure 44. ISPM15 Pallet Mark Example
To Next Page
Loading...
