Honeywell VOYAGER 1202G BF - Page 186

11 - 14
Laser Timeout - Button Hold Out-of-Stand
(Range 1 - 65525) *5000 ms
AOSMPT##### 5-8
Laser Timeout - Button Release Out-of-
Stand
(Range 1 - 65525) *0 ms
AOSMRT##### 5-8
*CodeGate Off In-Stand AISCGD0 5-9
CodeGate On In-Stand AISCGD1 5-9
CodeGate Off Out-of-Stand AOSCGD0 5-9
*CodeGate On Out-of-Stand AOSCGD1 5-9
*Button Function Off BTNFNC0 5-9
Button Function On BTNFNC1 5-9
Object Detection Mode Off In-Stand AISOEN0 5-9
Object Detection Mode On Out-of-Stand AOSOEN1 5-10
*Object Detection Mode Off Out-of-Stand AOSOEN0 5-9
*Object Detection Mode On In-Stand AISOEN1 5-10
Do Not End Object Detection After Good
Read In-Stand
AISOGD0 5-10
*End Object Detection After Good Read
In-Stand
AISOGD1 5-10
Do Not End Object Detection After Good
Read Out-of-Stand
AOSOGD0 5-10
*End Object Detection After Good Read
Out-of-Stand
AOSOGD1 5-10
Object Detection Laser Timeout In-Stand
(Range 1 - 65525) *5000 ms
AISODT##### 5-11
Object Detection Laser Timeout Out-of-
Stand
(Range 1 - 65525) *5000 ms
AOSODT##### 5-11
*Object Detection Distance - Short In-
Stand
AISRNG2 5-11
Object Detection Distance - Long In-Stand AISRNG1 5-11
Object Detection Distance - Short Out-of-
Stand
AOSRNG2 5-11
*Object Detection Distance - Long Out-of-
Stand
AOSRNG1 5-11
Character Activation Mode *Off HSTCEN0 5-11
On HSTCEN1 5-12
Activation Character HSTACH## 5-12
Do Not End Character Activation After
Good Read
HSTCGD0 5-12
*End Character Activation After Good
Read
HSTCGD1 5-12
Character Activation Laser Timeout
(Range 1 - 65525) *5000 ms
HSTCDT##### 5-12
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page