11 - 13
LED Settings Red LED Off LEDFN10 5-4
Green LED Off LEDFN20 5-4
Red LED On with Good Scan LEDFN11 5-4
Green LED On with Good Scan LEDFN21 5-4
*Red LED On with Laser LEDFN12 5-4
*Red LED On with Laser/Red LED Blinks
when Battery is Low
LEDFN11026 5-4
Green LED On with Laser LEDFN22 5-4
Red LED On when CodeGate Disabled LEDFN14 5-4
Green LED On when CodeGate Disabled LEDFN24 5-5
Red LED On when In-Stand LEDFN18 5-5
Green LED On when In-Stand LEDFN28 5-5
Red LED On with CTS LEDFN1128 5-5
Green LED On with CTS LEDFN2128 5-5
Red LED when Battery is Low LEDFN11024 5-5
Green LED when Battery is Low LEDFN21024 5-5
LED Brightness Red Off LEDIN10 5-5
Green Off LEDIN20 5-5
Red Low LEDIN11 5-5
Green Low LEDIN21 5-6
Red Medium LEDIN12 5-6
Green Medium LEDIN22 5-6
*Red High LEDIN13 5-6
*Green High LEDIN23 5-6
In-Stand and Out-of-Stand Settings In-Stand Defaults AISDFT 5-6
Out-of-Stand Defaults AOSDFT 5-6
Presentation Mode Out-of-Stand PAPPM1 5-7
Presentation Mode with CodeGate Out-of-
Stand
PAPPM2 5-7
Manual Activation Mode Off In-Stand AISMEN0 5-7
*Manual Activation Mode On In-Stand AISMEN1 5-7
Manual Activation Mode Off Out-of-Stand AOSMEN0 5-7
*Manual Activation Mode On Out-of-Stand AOSMEN1 5-7
Do Not End Manual Activation After Good
Read In-Stand
AISMGD0 5-7
*End Manual Activation After Good Read
In-Stand
AISMGD1 5-8
Do Not End Manual Activation After Good
Read Out-of-Stand
AOSMGD0 5-8
*End Manual Activation After Good Read
Out-of-Stand
AOSMGD1 5-8
Laser Timeout - Button Hold In-Stand
(Range 1 - 65525) *5000 ms
AISMPT##### 5-8
Laser Timeout - Button Release In-Stand
(Range 1 - 65525) *0 ms
AISMRT##### 5-8
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page
To Next Page
Loading...
