Honeywell Xtralis FAAST FLEX FLX-020

FAASTFLEX FAAST FLEX Product Guide
www.xtralis.com 10
Figure3-3: Mounting Hole Dimensions
3.3 Removing the Cover
1. Using a small screwdriver or other suitable tool, press in the two tabs on the inlet side of the FAAST
FLEX (see Figure3-4).
2. Rotate the cover up as shown and remove it.
ROTATE COVER UP
AND OFF
USE SCREWDRIVER TO
PRESS IN TWO TABS
INLET SIDE
Figure3-4: Removing the Cover