FAASTFLEX FAAST FLEX Product Guide
www.xtralis.com 17
5 User Interface
There are four buttons located under the cover that are used to configure various operating parameters and
perform additional setup, data logging, and test functions (see Figure5-1 and Figure5-2).
Notes: l *: Enter the passcode to start the procedure.
l Underlined: Press and hold the button for 5 seconds to start the procedure.
24V/750mA
RESET* / DISABLE
LOG / CONFIGURATION CHANGE*
SILENCE / NORMALIZE* / INCREMENT
TEST / PASSWORD CHANGE*
/ DECREMENT
Figure5-1: User Buttons (Single Channel)