Honeywell Xtralis FAAST FLEX FLX-020 User Manual

FAASTFLEX FAAST FLEX Product Guide
www.xtralis.com 63
10 Troubleshooting
10.1 Bluetooth Connectivity
Bluetooth connectivity issues may appear depending on the installation location and distance of the detector
you are trying to connect with. To ensure Bluetooth connectivity is correct, confirm that the detector's
dipswitch is enabled correctly by going through the dipswitch configuration process again, as captured in
section 6.3.3 Changing Configuration Mode. Once the FAAST FLEX detector has enabled Bluetooth
connectivity through the correct procedure of changing the dipswitch, the detector ID code should appear on
the FAAST FLEX Bluetooth App (Honeywell SmartConfig) as a nearby unit.
If the FAAST FLEX detector still does not appear on the list of connected devices, or the Bluetooth
functionalities can't be performed, restart the detector via power cycle and try again; this will ensure the
configuration has been activated.

Honeywell Xtralis FAAST FLEX FLX-020 Specifications

General

Brand	Honeywell
Model	Xtralis FAAST FLEX FLX-020
Category	Smoke Alarm
Language	English