MAN0878-09-EN_XLE_XLT_UserManual
A u g u s t 2 3 , 2 0 1 8 P a g e 56 | 158
Set Time/Date
The Set Time/Date Sub-Menu displays three System Settings. Time and Date are editable, and
Day is automatically calculated from the Date setting.
NOTE: Time and Date are split into three editable fields each. Use or → to select a field and
then use or to edit the field.
Time: 10:21:36 = Current time (hours:minutes:seconds in 24-hour format)
Date: 22-Jun-2006 = Current date (day-month-year)
Day: Thursday = Current day of week calculated from the Date setting
NOTE: After changing the Ethernet Addr, Mask, or Gtwy, the XLE/XLT must be power-cycled (or
reset) before the changes take effect.
XLT Specific:
Set Beeper (XLT only)
The Set Beeper Sub-Menu displays one System Setting, which is editable
Beeper enable: Yes
(default)
= Enables beeper
No = Disables beeper (does NOT affect ladder access)
To Next Page
Loading...
