For Systems With Hospira MedNet
TM
Software
5- 2 430-95597-001 (Rev. 06/05)
Dose Calc (mcg/kg/min on A)
DOSE CALCULATION- Allows programming Dose
Rates in alternative units of measure. Dose
Calculation can be used in Simple Delivery, Loading
Dose, and Multistep.
Clear ALL settings when changing patients or
multiple programming parameters.
The Area Selection screen will
appear if your system has been
programmed with the MedNet
accessory.
Use to select CCA and
bring you to the Main Delivery
Screen.
NOTE: To change the CCA while
infusing, see Changing CCA While Infusing on page 6-12.
1 Select
[A] at the Main
Delivery Screen.
Area Selection
Enter
Select, then Enter
Any Hospital, USA
MM/DD/YY XXYYZZ- 123456
ICU
MedSurg
OR
Cardio
Urology
Psych
Recov
L&D
5 West
Renal
Neo ICU
OB/GYN
Oncol
Ad ICU
ER
7 South
3 North
4 North
A
A
B
B
STOPPED STOPPED
Rate
mL/hr
Vol Inf
mL
Options/
Vol Inf
Back
Prime
0
00
0
MedSurg
**SCREENS SHOWN IN THIS MANUAL
ARE EXAMPLES ONLY AND DON’T
NECESSARILY REFLECT CURRENT
ACTUAL PRACTICE**
sec05.fm Page 2 Wednesday, June 8, 2005 8:31 AM
To Next Page
Loading...
