ERROR CODES
SERVICE MANUAL 61
Error Code 22
Program interrupted. There was a power outage while the program was running. The
power outage lasted for so long that the program cannot be restarted.
Steps Check list Solution
1 - The oven can be set up to
restart after a power outage.
Contact service personnel.
Error Code 23
The oven is too hot for CombiWash to start.
Steps Check list Solution
1 Cool down the oven and restart
CombiWash
2 Go to the test menu to see which infor-
mation the computer displays.
3 Check that the temperature in the oven
chamber matches the temperature that is
displayed.
Cool down the oven and
restart CombiWash.
4 Test the temperature sensor using an
ohmmeter, and check whether the value
matches the value in the table.
Change the sensor.
5 - Change the computer.
To Next Page
Loading...
