HP 3000 9x9KS - Enterprise Parallel Server Configurations; Model EPS 22 Configuration; Model EPS 30 Configuration

C-2
Enterprise Parallel Server Configurations
There are two basic Enterprise Parallel Server configurations currently supported.
• The first consists of K-Class base and K-Class add-on nodes
• The second has a T-Class base node and T-Class add-on nodes
Enterprise Parallel Server Models including:
Model EPS 22 Configuration
The EPS 22 is comprised of an HP 9000 K-460 in a 1.6 meter cabinet, and up to seven K-460 add-on
nodes. The add-on nodes can be in 1.6-meter cabinets or 2-meter cabinets.
When in 2-meter cabinets, there are two K-460 SPUs mounted in one 2-meter cabinet.
Peripheral components (UPS’s, FDDI concentrators etc.) are installed in expansion cabinets.
A 1.6-meter expansion cabinet with two 3.0 kVA UPS’s is also available.
• There are High Availability (HA) and non-HA versions available.
• Add-on nodes can be installed in 1.6 meter cabinets or 2-meter cabinets.
• If two meter cabinets are used, two K-460 SPUs are installed in one 2-meter cabinet.
• Peripheral components are installed in an expansion cabinet associated with the 2-meter
cabinet.
Model EPS 30 Configuration
The Model EPS 30 is comprised of an HP 9000 T-520 base node, in a 1.6-meter cabinet, and the
following:
• 8 Node FDDI connect - High Availability, and
• 8 Node - Service Guard/4-node - OPS - High Availability
NOTE
Power Distribution Units (PDUs) are not installed in 2-meter
cabinets containing two K-460 SPU’s or 1.6 meter cabinets
containing two 3.0 kVA UPS’s.