To Next Page

To Previous Page

183

Figure 83 Add a port group

# Select User Access Manager > Service Parameters > Validate System Configuration from the

navigation tree to validate the configurations.

2. Configure the switch

• Configure a RADIUS scheme

# Create RADIUS scheme rs1 and enter its view.

<Switch> system-view

[Switch] radius scheme rs1

# Configure the server type for the RADIUS scheme. When using the iMC server, configure the RADIUS

server type as extended.

[Switch-radius-rs1] server-type extended

# Specify the primary authentication server and primary accounting server, and configure the keys for

communication with the servers.

[Switch-radius-rs1] primary authentication 192.168.0.112

[Switch-radius-rs1] primary accounting 192.168.0.112

[Switch-radius-rs1] key authentication radius

[Switch-radius-rs1] key accounting radius

# Configure the access device to not carry the ISP domain name in the username sent to the RADIUS

server.

[Switch-radius-rs1] user-name-format without-domain

[Switch-radius-rs1] quit

• Configure an authentication domain

# Create ISP domain dm1 and enter its view.

[Switch] domain dm1

# Configure AAA methods for the ISP domain.

[Switch-isp-dm1] authentication portal radius-scheme rs1

[Switch-isp-dm1] authorization portal radius-scheme rs1

[Switch-isp-dm1] accounting portal radius-scheme rs1

[Switch-isp-dm1] quit

HP 3600 v2 Series Security Configuration Guide

Other manuals for HP 3600 v2 Series