HP 3600 v2 Series Security Configuration Guide

42
To do… Use the command… Remarks
Enter system view system-view —
Enter ISP domain view domain isp-name —
Specify the default
authentication method for all
types of users
authentication default { hwtacacs-scheme
hwtacacs-scheme-name [ local ] | local |
none | radius-scheme radius-scheme-name
[ local ] }
Optional
local by default
Specify the authentication
method for LAN users
authentication lan-access { local | none |
radius-scheme radius-scheme-name [ local |
none ] }
Optional
The default authentication
method is used by default.
Specify the authentication
method for login users
authentication login { hwtacacs-scheme
hwtacacs-scheme-name [ local ] | local |
none | radius-scheme radius-scheme-name
[ local ] }
Optional
The default authentication
method is used by default.
Specify the authentication
method for portal users
authentication portal { local | none |
radius-scheme radius-scheme-name [ local ] }
Optional
The default authentication
method is used by default.
Specify the authentication
method for privilege level
switching
authentication super { hwtacacs-scheme
hwtacacs-scheme-name | radius-scheme
radius-scheme-name }
Optional
The default authentication
method is used by default.
NOTE:
• The authentication method specified with the authentication default command is for all types of users
and has a priority lower than that for a specific access type.
• With an authentication method that references a RADIUS scheme, AAA accepts only the authentication
result from the RADIUS server. The Access-Accept message from the RADIUS server also carries the
authorization information, but the authentication process ignores the information.
• If you specify the radius-scheme
radius-scheme-name local, hwtacacs-scheme
hwtacacs-scheme-name local option when you configure an authentication method, local
authentication is the backup method and is used only when the remote server is not available.
• If you specify only the local or none keyword in an authentication method configuration command, the
switch has no backup authentication method and performs only local authentication or does not perform
any authentication.
• If the method for level switching authentication references an HWTACACS scheme, the switch uses the
login username of a user for level switching authentication of the user by default. If the method for level
switching authentication references a RADIUS scheme, the system uses the username confi
g
ured for the
corresponding privilege level on the RADIUS server for level switching authentication, rather than the
login username. A username configured on the RADIUS server is in the format of $enab
level $, where
level specifies the privilege level to which the user wants to switch. For example, if user user1 of domain
aaa wants to switch the privilege level to 3, the system uses $enab3@aaa$ for authentication when the
domain name is required and uses $enab3$ for authentication when the domain name is not required.
Configuring AAA authorization methods for an ISP domain
In AAA, authorization is a separate process at the same level as authentication and accounting. Its
responsibility is to send authorization requests to the specified authorization servers and to send

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English