HP 3600 v2 Series Security Configuration Guide

47
NOTE:
• Configuring or changing the device ID of a switch will log out all online users of the switch.
• HP recommends to save the configuration and reboot the switch after configuring or changing the
device ID.
• The device ID is the symbol for stateful failover mode. Do not configure any device ID for a switch
working in stand-alone mode.
Configuring a switch as a RADIUS server
RADIUS server functions configuration task list
Task Remarks
Configuring a RADIUS user Required
Specifying a RADIUS client Required
Configuring a RADIUS user
This task is to create a RADIUS user and configure a set of attributes for the user on a switch that serves
as the RADIUS server. The user attributes include the password, authorization attribute, expiration time,
and user description. After completing this task, the specified RADIUS user can use the username and
password for RADIUS authentication on the switch.
Follow these steps to configure a RADIUS user:
To do… Use the command… Remarks
Enter system view system-view —
Create a RADIUS user and enter
RADIUS server user view
radius-server user user-name
Required
No RADIUS user exists by
default.
Configure a password for the
RADIUS user
password [ cipher | simple ] password
Optional
By default, no password is
specified.
Configure the authorization
attribute for the RADIUS user
authorization-attribute { acl acl-number |
vlan vlan-id } *
Optional
Not configured by default.
Set the expiration time for the
RADIUS user
expiration-date time
Optional
By default, no expiration
time is set, and the system
does not check users’
expiration time.
Configure a description for the
RADIUS user
description text
Optional
Not configured by default.

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English