EasyManuals Logo

HP 3600 v2 Series Security Configuration Guide

HP 3600 v2 Series
398 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
55
[Switch] radius scheme rad
# Specify the primary authentication server.
[Switch-radius-rad] primary authentication 10.1.1.1 1812
# Set the shared key for secure authentication communication to expert.
[Switch-radius-rad] key authentication expert
# Configure the scheme to include the domain names in usernames to be sent to the RADIUS server.
[Switch-radius-rad] user-name-format with-domain
# Specify the service type for the RADIUS server, which must be extended when the RADIUS server runs
iMC.
[Switch-radius-rad] server-type extended
[Switch-radius-rad] quit
# Configure the AAA methods for the domain.
[Switch] domain bbb
[Switch-isp-bbb] authentication login radius-scheme rad
[Switch-isp-bbb] authorization login radius-scheme rad
[Switch-isp-bbb] quit
3. Verify the configuration
After you complete the configuration, the SSH user should be able to use the configured account to
access the user interface of the switch and can access the demands of level 0 through level 3. .
# Use the display connection command to view the connection information on the switch.
[Switch] display connection
Index=1 ,Username=hello@bbb
IP=192.168.1.58
IPv6=N/A
Total 1 connection(s) matched.
AAA for portal users by a RADIUS server
Network requirements
As shown in Figure 16, the host automatically obtains a public network IP address through DHCP.
Configure the switch to:
• Use the RADIUS server for authentication, authorization, and accounting of portal users.
• Provide direct portal authentication so that the host can access only the portal server before passing
portal authentication and can access the Internet after passing portal authentication.
• Include the domain name in a username sent to the RADIUS server.
On the RADIUS server, add a service that charges 120 dollars for up to 120 hours per month, configure
a user and register the service for the user.
Set the shared keys for secure RADIUS communication to expert. Set the ports for
authentication/authorization and accounting to 1812 and 1813 respectively.

Table of Contents

Other manuals for HP 3600 v2 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 3600 v2 Series and is the answer not in the manual?

HP 3600 v2 Series Specifications

General IconGeneral
BrandHP
Model3600 v2 Series
CategorySwitch
LanguageEnglish

Related product manuals