HP 3600 v2 Series Security Configuration Guide

33
To do… Use the command… Remarks
Clear the buffered stop-accounting
requests for which no responses have
been receive
reset stop-accounting-buffer
{ radius-scheme radius-server-name |
session-id session-id | time-range
start-time stop-time | user-name
user-name } [ slot slot-number ]
Available in user view
Configuring HWTACACS schemes
NOTE:
You cannot remove the HWTACACS schemes in use or change the IP addresses of the HWTACACS
servers in use.
HWTACACS configuration task list
Task Remarks
Creating an HWTACACS scheme Required
Specifying the HWTACACS authentication servers Required
Specifying the HWTACACS authorization servers Optional
Specifying the HWTACACS accounting servers and the relevant parameters Optional
Specifying the shared keys for secure HWTACACS communication Required
Specifying the VPN to which the servers belong Optional
Setting the username format and traffic statistics units Optional
Specifying a source IP address for outgoing HWTACACS packets Optional
Setting timers for controlling communication with HWTACACS servers Optional
Displaying and maintaining HWTACACS Optional
Creating an HWTACACS scheme
The HWTACACS protocol is configured on a per scheme basis. Before performing other HWTACACS
configurations, follow these steps to create an HWTACACS scheme and enter HWTACACS scheme
view:
To do… Use the command… Remarks
Enter system view system-view —
Create an HWTACACS scheme
and enter HWTACACS scheme
view
hwtacacs scheme
hwtacacs-scheme-name
Required
Not defined by default
NOTE:
• Up to 16 HWTACACS schemes can be configured.
• A scheme can be deleted only when it is not referenced.

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English