260
• The URL of the registration server for certificate request is not correct or not configured.
• No authority is specified for certificate request.
• Some required parameters of the entity DN are not configured.
Solution
• Make sure that the network connection is physically proper.
• Retrieve a CA certificate.
• Regenerate a key pair.
• Specify a trusted CA.
• Use the ping command to check that the RA server is reachable.
• Specify the authority for certificate request.
• Configure the required entity DN parameters.
Failed to retrieve CRLs
Symptom
Failed to retrieve CRLs.
Analysis
Possible reasons include:
• The network connection is not proper. For example, the network cable might be damaged or loose.
• No CA certificate has been retrieved before you try to retrieve CRLs.
• The IP address of LDAP server is not configured.
• The CRL distribution URL is not configured.
• The LDAP server version is wrong.
Solution
• Make sure that the network connection is physically proper.
• Retrieve a CA certificate.
• Specify the IP address of the LDAP server.
• Specify the CRL distribution URL.
• Re-configure the LDAP version.
To Next Page
Loading...
Need help?
General