EasyManua.ls Logo

HP 3600 v2 Series - Page 208

HP 3600 v2 Series
398 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
197
[Switch-dhcp-pool-3] quit
# Configure IP address pool 4, and bind the printer MAC address 0015-e9a6-7cfe to the IP address
3.3.3.111/24 in this address pool.
[Switch] dhcp server ip-pool 4
[Switch-dhcp-pool-4] static-bind ip-address 3.3.3.111 mask 255.255.255.0
[Switch-dhcp-pool-4] static-bind mac-address 0015-e9a6-7cfe
[Switch-dhcp-pool-4] quit
5. Configure portal authentication.
# Create SSL server policy sslsvr and specify it to use PKI domain pkidm.
[Switch] ssl server-policy sslsvr
[Switch-ssl-server-policy-sslsvr] pki pkidm
[Switch-ssl-server-policy-sslsvr] quit
# Configure the local portal server to support HTTPS and use SSL server policy sslsvr.
[Switch] portal local-server https server-policy sslsvr
# Configure IP address 4.4.4.4 for interface loopback 12.
[Switch] interface loopback 12
[Switch-LoopBack12] ip address 4.4.4.4 32
[Switch-LoopBack12] quit
# Specify the listening IP address of the local portal server as 4.4.4.4.
[Switch] portal local-server ip 4.4.4.4
# Enable Layer-2 portal authentication on Ethernet 1/0/1 and specify VLAN 2 as the Auth-Fail VLAN, to
which terminals failing authentication are added.
[Switch] interface ethernet 1/0/1
[Switch–Ethernet1/0/1] port link-type hybrid
[Switch–Ethernet1/0/1] mac-vlan enable
[Switch–Ethernet1/0/1] portal local-server enable
[Switch–Ethernet1/0/1] portal auth-fail vlan 2
[Switch–Ethernet1/0/1] quit
6. Configure 802.1X authentication.
# Enable 802.1X authentication globally.
[Switch] dot1x
# Enable 802.1X authentication (MAC-based access control required) on Ethernet 1/0/1, and specify
VLAN 2 as the Auth-Fail VLAN.
[Switch] interface ethernet 1/0/1
[Switch–Ethernet1/0/1] dot1x port-method macbased
[Switch–Ethernet1/0/1] dot1x
[Switch–Ethernet1/0/1] dot1x auth-fail vlan 2
[Switch–Ethernet1/0/1] quit
7. Configure MAC authentication.
# Enable MAC authentication globally.
[Switch] mac-authentication
# Enable MAC authentication on Ethernet 1/0/1, and specify VLAN 2 as the Auth-Fail VLAN
[Switch] interface ethernet 1/0/1
[Switch–Ethernet1/0/1] mac-authentication

Table of Contents

Other manuals for HP 3600 v2 Series

Related product manuals