HP 3600 v2 Series Security Configuration Guide

218
[Device] dot1x authentication-method chap
# Set port security’s limit on the number of MAC addresses to 64 on the port.
[Device-Ethernet1/0/1] port-security max-mac-count 64
# Set the port security mode to macAddressElseUserLoginSecure.
[Device-Ethernet1/0/1] port-security port-mode mac-else-userlogin-secure
# Set the NTK mode of the port to ntkonly.
[Device-Ethernet1/0/1] port-security ntk-mode ntkonly
Verifying the configuration
# Display the port security configuration.
<Device> display port-security interface ethernet 1/0/1
Equipment port-security is enabled
Trap is disabled
Disableport Timeout: 20s
OUI value:
Ethernet1/0/1 is link-up
Port mode is macAddressElseUserLoginSecure
NeedToKnow mode is NeedToKnowOnly
Intrusion Protection mode is NoAction
Max MAC address number is 64
Stored MAC address number is 0
Authorization is permitted
# Display MAC authentication information.
<Device> display mac-authentication interface ethernet 1/0/1
MAC address authentication is enabled.
User name format is fixed account
Fixed username:aaa
Fixed password:123456
Offline detect period is 60s
Quiet period is 5s
Server response timeout value is 100s
The max allowed user number is 2048 per slot
Current user number amounts to 3
Current domain is mac
Silent MAC User info:
MAC Addr From Port Port Index
Ethernet1/0/1 is link-up
MAC address authentication is enabled
Authenticate success: 3, failed: 7
Max number of on-line users is 2048
Current online user number is 3
MAC ADDR Authenticate state Auth Index
1234-0300-0011 MAC_AUTHENTICATOR_SUCCESS 13

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English