HP 406 - Appendix D Specifications

D Specications
Component Value
Chassis
Height
Width
Depth
14.13 in
6.7 in
13.98 in
359 mm
170 mm
355 mm
Approximate Weight 13.47 lb 6.11 kg
Temperature Range
Operating
Nonoperating
50° to 95°F
-22° to 140°F
10° to 35°C
-30° to 60°C
NOTE: Operating temperature is derated 1.0° C per 300 m (1000 ft) to 3000 m (10,000 ft) above sea level; no direct
sustained sunlight. Maximum rate of change is 10° C/Hr. The upper limit may be limited by the type and number of options
installed.
Relative Humidity (noncondensing)
Operating
Nonoperating (38.7°C max wet bulb)
10-90%
5-95%
10-90%
5-95%
Maximum Altitude (unpressurized)
Operating
Nonoperating
10,000 ft
30,000 ft
3048 m
9144 m
Power Supply
Operating Voltage Range
Rated Voltage Range
1
Rated Line Frequency
Operating Line Frequency
90-264 VAC (Energy Star 6.0)
180-264 VAC (active PFC)
100-240 VAC (Energy Star 6.0)
200-240 VAC (active PFC)
50/60 Hz
47-63 Hz
Standard Eciency 300W active PFC
230 VAC input only
High Eciency 300W active Energy Star 6.0
82/85/82% ecient at 20/50/100% load (115V)
82/85/82% ecient at 20/50/100% load (230V)
Rated Input Current 4A
Current Leakage (NFPA 99) < 900uA/230Vac
1
This system utilizes an active power factor corrected power supply. This allows the system to pass the CE mark requirements for use
in the countries of the European Union. The active power factor corrected power supply also has the added benet of not requiring an
input voltage range select switch.
115