HP 54645A - Using Labels on the Mixed-Signal Oscilloscope; To Turn the Label Display on or off

Using Labels on the Mixed-Signal Oscilloscope
The HP 54645D Mixed-Signal Oscilloscope allows you to define and
assign labels to each input channel. Or, you can turn labels off to
increase the waveform display area.
To turn the label display on or off
•
To display channel labels, press
Label/Threshold
, then press
the
Labels On
softkey.
•
To turn off channel labels display, press
Label/Threshold
,
then press the
Labels Off
softkey.
•
You can press
Label/Threshold
repeatedly to toggle the
channel labels display.
4-53