To save or recall front-panel setups
Ten memories are available to store front-panel setups. Saving front-panel
setups can save you time in situations where several setups are repeated
many times.
1
Press
Setup
.
2
To change the selected memory location, press either the left-most
softkey or turn the Entry knob.
3
Press the
Save
softkey to save a front-panel setup, then press the
Recall
softkey to recall a front-panel setup.
To reset the HP 54645A/D instrument setup
1
To reset the instrument to the default factory-preset configuration,
press
Setup
.
2
Press the
Default Setup
softkey.
3
To reset the instrument to the configuration that was present before
pressing
Autoscale
, press the
Undo Autoscale
softkey.
Saving and Recalling the Configuration
To save or recall front-panel setups
4-48
To Next Page
Loading...
