To modify the graticule
1
Press
Display
.
2
Press one of the
Grid
softkeys to define the graticule used for the
waveform area on the display.
•
Frame has a set of hash marks along the top and bottom of the display only.
Major divisions are indicated by longer hash marks.
•
Full has a set of hash marks through the center of the waveform display
area, with major divisions indicated by a full-height dotted line through the
waveform display.
•
None has only a border around the waveform display area.
Each major division in the graticule corresponds to the time given by the
Time/Div setting shown to the right of the delay value on the display.
Front-Panel Overview
To modify the graticule
2-33
To Next Page
Loading...
