8
Adjust HB Cont (half-bright contrast) for the best contrast between
the half-bright and full-bright blocks.
You can re-adjust Sub Bri, intensity control, and HB Cont to suit your
preference.
9
Press any key to continue to the next test pattern. Then, adjust
H.Hold (horizontal hold) to center the display horizontally.
10
Adjust Focus for the best focus.
11
Press any key to continue to the normal display pattern. Then adjust
V.Lin (vertical linearity) for equal sizing of all four corner squares.
12
Adjust V.Size (vertical size) to center the display vertically at the
maximum allowable size without losing the text.
Adjustments V.Lin and V.Size interact so you may need to re-adjust sizing
and vertical centering of the display.
Display Board Adjustment Locations
Figure 7-8
Testing, Adjusting, and Troubleshooting
To adjust the display
7-39
To Next Page
Loading...
