Front-Panel Areas Description Applies to Unit:
Channel Numbers The channel numbers are always shown along the left edge of the
display.
HP 54645A/D
Channel Labels You can assign channel labels to help you remember the function of
each channel in your circuit, or disable the labels to increase the
waveform display area.
HP 54645D only
Analog channel
voltage levels
Voltages for channels 1 and 2 (analog channels 1 and 2 on
HP 54645D) are set to 100 mV by default, and range from 1.0 mV to
5.0 V.
HP 54645A/D
Front-Panel Overview
Description of Front-Panel Areas
2-15
To Next Page
Loading...
