HP 5500 HI Series Installation Guide

52
Product
code
Card model Port type and quantity Transceiver module options
JD367A LSPM2GP2P 2 × 1 Gbps SFP fiber ports
1000 Mbps SFP transceiver modules
(except for SFP-
GE-T)
JD368B LSPM2SP2P 2 × 1/10 Gbps SFP+ fiber ports
• 1000 Mbps SFP transceiver modules
• 10 Gbps SFP+ transceiver
modules/SFP+ cables
JD360B LSPM1CX2P 2 × 10 Gbps CX4 copper ports CX4 cables
JD359B LSPM1XP2P 2 × 10 Gbps XFP fiber ports
10 Gbps XFP transceiver modules
JD361B LSPM1XP1P 1 × 10 Gbps XFP fiber port
JG314A LSP5GP8P0
8 × 100/1000Base-X SFP fiber
ports
• 1000 Mbps SFP transceiver modules
• 100 Mbps SFP transceiver modules
JG313A LSP5GT8P
8 × 10/100/1000Base-T
Ethernet ports
N/A
NOTE:
• The LSP5GT8P interface card adds 34.75 mm (1.37 in) to the depth of the switch.
• The LSP5GP8P0 interface card adds 69.75 mm (2.75 in) to the depth of the switch.
• For more information about the interface cards, see their user guides.
SFP/SFP+/XFP transceiver modules and SFP+/CX4
cables
This section describes the transceiver modules and transceiver module cables available for the HP 5500
HI Switch Series.
IMPORTANT:
The operating temperature is 0°C to 45°C (32°F to 113°F) for the JD121A and JD107A transceiver
modules, and 0°C to 50°C (32°F to 122°F) for all other transceiver modules.
NOTE:
• To guarantee the functionality of the transceiver module ports, use only HP transceiver modules.
• The transceiver modules available for this switch series are subject to change over time. For the most
up-to-date list of transceiver modules, consult your HP sales representative or technical support
engineer.
• For the transceiver module specifications, see
HP A-Series Switches Transceiver Modules User Guide .
For information about installing or removing a transceiver module, see
SFP/SFP+/XFP Transceiver
Modules Installation Guide
.
100 Mbps SFP transceiver modules

HP 5500 HI Series Specifications

General

Brand	HP
Model	5500 HI Series
Category	Switch
Language	English