HP 5500 HI Series

47
Appendix A Technical specifications
Technical specifications
Table 9 describes the technical specifications for the 5500 HI switches.
Table 9 HP 5500 HI switches technical specifications (I)
Item
5500-24G-4SFP HI (2
slots)
5500-48G-4SFP HI (2
slots)
5500-24G-SFP HI (2
slots)/5500-24G-SFP HI
TAA (2 slots)
Dimensions (H × W × D)
43.6 × 440 × 360 mm
(1.72 × 17.32 × 14.17
in)
43.6 × 440 × 420 mm
(1.72 × 17.32 × 16.54
in)
43.6 × 440 × 360 mm
(1.72 × 17.32 × 14.17 in)
Weight < 7.5 kg (16.53 lb) < 8.5 kg (18.74 lb) < 7.5 kg (16.53 lb)
Management ports 1 console port, 1 management Ethernet port, both on the front panel
Fixed network ports (on
the front panel)
• 24 ×
10/100/1000Base-
T auto-sensing
Ethernet ports
• 4 ×
100/1000Base-X
SFP ports
• 2 × 1/10 Gbps
SFP+ ports
• 48
×10/100/1000Base-
T auto-sensing
Ethernet ports
• 4 × 100/1000Base-X
SFP ports
• 2 x 1/10 Gbps SFP+
ports
• 24 × 100/1000Base-X
SFP ports
• 4 ×
10/100/1000Base-T
auto-sensing Ethernet
ports
• 2 × 1/10 Gbps SFP+
ports
Expansion interface
card slots
2 (SLOT1 and SLOT2),
on the rear panel
2 (SLOT1 and SLOT2), on
the rear panel
2 (SLOT1 and SLOT2), on
the rear panel
Power supply slots 2, on the rear panel 2, on the rear panel 2, on the rear panel
Input voltage
• AC-input
{ Rated voltage range: 100 VAC to 240 VAC @ 50 Hz or 60 Hz
{ Max voltage range: 90 VAC to 264 VAC @ 47 Hz to 63 Hz
• DC-input
{ Rated voltage range: –48 VDC to –60 VDC
{ Max voltage range: –36 VDC to –72 VDC
NOTE:
You can use the site –48 VDC power supply or an HP A-RPS800 (JD183A) or
A-RPS1600 (JG136A) RPS as the DC power source.
Minimum power
consumption
AC: 62 W
DC: 55.5 W
AC: 94 W
DC: 86.4 W
AC: 60 W
DC: 50 W
Maximum power
consumption
AC: 141 W
DC: 115 W
AC: 191 W
DC: 180 W
AC: 135 W
DC: 115 W
Chassis leakage current
compliance
UL60950-1, EN60950-1, IEC60950-1, GB4943