HP 5800 Series Configuration Guide

98
3.
Upgrade the IRF virtual device
# Copy the boot file newest.bin to the root directory of the storage medium on a subordinate switch
(with the member ID 2).
<Sysname> copy newest.bin slot2#flash:/
# Specify newest.bin as the main boot file to be used at the next startup for all member devices.
<Sysname> boot-loader file newest.bin slot all main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot
1!
The specified file will be used as the main boot file at the next reboot on slot
2!
# Reboot the IRF virtual device and the boot file is updated at the system reboot.
<Sysname> reboot
Displaying and maintaining FTP
Task Command Remarks
Display the configuration of the FTP client.
display ftp client configuration [ |
{ begin | exclude | include } regular-
expression ]
Available in any view.
Display the configuration of the FTP server.
display ftp-server [ | { begin | exclude
| include } regular- expression ]
Available in any view.
Display detailed information about
logged-in FTP users.
display ftp-user [ | { begin | exclude |
include } regular-expression ]
Available in any view.

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)