41
Figure 12 Configuration page
Configuring scheme authentication for Telnet login
Prerequisites
You have logged in to the device.
By default, log in to the device through the console port without authentication and have user privilege level
3 after login. For information about logging in to the device with the default configuration, see
“Configuration requirements.”
Procedure
Ste
Command
Remarks
1. Enter system view. system-view —
2. Enable Telnet.
telnet server enable
Required.
By default, the Telnet service is disabled.
3. Enter one or multiple
VTY user interface
views.
user-interface vty
first-number
[ last-number ]
—
4. Specify scheme
authentication mode.
authentication-mod
e scheme
Required.
Whether local, RADIUS, or HWTACACS authentication is
adopted depends on the configured AAA scheme.
By default, local authentication is adopted.
To Next Page
Loading...
