HP 5800 Series Configuration Guide

172
Task Command Remarks
Display RPS state.
display rps [ slot slot-number
[ rps-id ] ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display device reboot mode.
display reboot-type [ slot slot-
number ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display scheduled task configuration
(configured by schedule job).
display schedule job [ | { begin |
exclude | include } regular-
expression ]
Available in any view
Display device reboot time.
display schedule reboot [ | { begin |
exclude | include } regular-
expression ]
Available in any view
Display schedule task configuration
(configured by job).
display job [ job-name ] [ | { begin |
exclude | include } regular-
expression ]
Available in any view
Display the exception handling methods.
display system-failure [ | { begin |
exclude | include } regular-
expression ]
Available in any view
Display device software version update
records (boot file).
display version-update-record [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Clear the records of updating the device
software.
reset version-update-record [ |
{ begin | exclude | include }
regular-expression ]
Available in system
view

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)