57
Procedure
To configure password authentication for modem login:
Ste
Command
Remarks
Enter system view system-view —
Enter one or more AUX user
interface views
user-interface aux first-number
[ last-number ]
—
Specify the password
authentication mode
authentication-mode password
Required
By default, the authentication
mode is none for modem users
Set the local password
set authentication password
{ cipher | simple } password
Required
By default, no local password is
set.
Configuring common settings for
modem login
—
Optional
For more information, see
“Configuring common settings for
modem login (o
ptional).”
When you log in to the device through modems after the configuration, you are prompted to enter a login
password. A prompt such as <HP> appears after you enter the password and press Enter, as shown in Figure
8.
Figure 8 Configuration page
To Next Page
Loading...
