7. If a console is connected to the router, the session is restarted. The
message “Waiting for speed sense” appears on the console.
Since the correct speed for your terminal has not been sensed yet,
that 9600-baud message may appear garbled. When you see the new
text on your console (or simply a few seconds after the Self-test LED
turns off), press [Return] and pause. Repeat if necessary until the router
senses and matches your baud rate. Your console session then begins.
(The detailed procedure for connecting a console is in chapter 1,
“Installation.”)
Description and Operation
Initialization Sequence
2-16
To Next Page
Loading...
