6-56 Removal and Replacement
MEDIA DIVERTER REMOVAL
To remove the media diverters, perform the following procedure:
1. Remove the window assembly.
2. Remove the left and right endcovers.
3. Remove the encoder strip.
4. Remove the bail assembly.
5. Remove the overdrive support assembly.
6. Remove the drive roller assembly.
7. Flex each media diverter and pull it free of the chassis assembly. See Figure 6-36.
Media Diverters
Figure 6-36.
Media Director
(C)C2858-29a
To Next Page
Loading...
Need help?
General
