3-21Installation and Configuration
FRONT PANEL LANGUAGES
DesignJet 650C plotter menus and messages can be configured to display in English, French
(ªFrancaisº), German (ªDeutschº), Spanish (ªCastell.º), Italian (ªItalianoº), Portuguese
(ªPortugueseº) and Japanese (Katakana) characters.
To change the display language, or if the display is in a language you cannot understand, use
the following procedure to get to a language you do understand.
1. Turn the plotter OFF.
2. Press and hold down the Enter button while turning the plotter ON. Release the
Enter button.
3. Using the arrow buttons, scroll to the desired language to be displayed and press the
Enter button.
To Next Page
Loading...
