4-2 Preventive Maintenance
EFFECT ON PRODUCT RELIABILITY
To maintain the plotter in good operating condition, keep it free of dust accumulation, ink,
and other contamination. Cleaning intervals are determined by the local conditions under
which the plotter is operated and by the types of plotter supplies used. As with any precision
electronics equipment, proper maintenance will help to ensure reliability and prolong prod-
uct life.
PREVENTIVE MAINTENANCE PROCEDURES
The following general cleaning procedure can be performed by the user. Follow normal
safety precautions and prevent water or other cleaning materials from entering the electron-
ics enclosure of the plotter.
W A R N I N G
GENERAL CLEANING
Proper general cleaning should include the following:
1. Blow away dust accumulation with compressed air if available.
2. Clean the outer surface of the plotter with a damp sponge or cloth. Use a mild soap
and water solution if necessary. Wipe the plotter dry after cleaning.
Note
Do not use abrasive cleaners on the plastic carriage cover. Clean the cover
with a mild solution of soap and water and wipe it dry with a soft lint-free
cloth to prevent scratching.
To Next Page
Loading...
Need help?
General
