HP 830 - Displaying Detailed Information about the Switch

34
Displaying detailed information about the switch
Use the display device verbose command to display detailed information about the switch.
• On the controller engine:
<HP>display device verbose
Slot No Board Type Status Max Ports
0 830 24P LSW Normal -
1 830 24P Normal 2
Table 5 Command output (on the controller engine)
Field Description
Slot No. Slot number of the controller engine.
Board Type Controller engine model.
Status
Operational status of the controller engine:
• Fault—The controller engine in the slot has failed and cannot boot correctly.
• Normal—The controller engine in the slot is operating correctly.
Max Ports Maximum number of interfaces that the controller engine supports.
• On the switching engine:
<HP>display device verbose
Slot 1
SubSNo PortNum PCBVer FPGAVer CPLDVer BootRomVer AddrLM Type State
0 30 Ver.A NULL 006 2.00 IVL MAIN Normal
1 1 Ver.B NULL NULL NULL IVL 10GE Normal
Slot 1 Subslot 0 info:
Status : Normal
Type : MAIN
Software Ver : Release 3308P17
PCB Ver : Ver.A
FPGA Ver : NULL
BootRom Ver : 2.00
CPLD Ver : 006
PortNum : 30
Chip : 0
Learning Mode: IVL
Slot 1 Subslot 1 info:
Status : Normal
Type : 10GE
Software Ver : NULL
PCB Ver : Ver.B
FPGA Ver : NULL
BootRom Ver : NULL
CPLD Ver : NULL
PortNum : 1