HP 830 - Displaying the CPU Usage of the Switch; Displaying the Memory Usage of the Switch; Displaying the Operational Status of the Built-In Fans

36
Field Description
MANUFACTURING_DATE Manufacturing data of the switch.
VENDOR_NAME Vendor name.
Displaying the CPU usage of the switch
Use the display cpu-usage command to display the CPU usage statistics for the switch.
<HP>display cpu-usage
Unit CPU usage:
1% in last 5 seconds
1% in last 1 minute
1% in last 5 minutes
Table 8 Command output
Field Description
Unit CPU usage CPU usage.
1% in last 5 seconds
Average CPU usage in the last 5 seconds (after the switch boots, the switch
calculates and records the average CPU usage at the interval of 5 seconds).
1% in last 1 minute
Average CPU usage in the last minute (after the switch boots, the switch
calculates and records the average CPU usage at the interval of 1 minute).
1% in last 5 minutes
Average CPU usage in the last 5 minutes (after the switch boots, the switch
calculates and records the average CPU usage at the interval of 5 minutes).
Displaying the memory usage of the switch
Use the display memory command to display the memory usage statistics for the switch.
<HP>display memory
System Total Memory(bytes): 214811120
Total Used Memory(bytes): 133090832
Used Rate: 61%
Table 9 Command output
Field Description
System Total Memory(bytes) Physical memory size (in bytes) of the switch.
Total Used Memory(bytes) Used memory size (in bytes) of the switch.
Used Rate Memory usage of the switch.
Displaying the operational status of the built-in fans
Use the display fan command to display the operating states of fans.
<HP>display fan
Fan 1 State: Normal
Fan 2 State: Normal