15
1. Wear an ESD-preventive wrist strap, and verify that the rack is sturdy and properly grounded.
2. Use the screws packed with the front mounting brackets to attach the front mounting brackets to
both sides of the switch. See Figure 9.
3. Install the rack shelf on the rack. (See Figure 15. This figure is for reference only and may differ
from the actual installation on your rack.)
Figure 15 Installing a rack shelf
4. Place the switch horizontally on the rack shelf, push it into the rack along the rack shelf, and secure
the front mounting brackets onto the front square-holed brackets of the rack by using the screws
and cage nuts. See Figure 16.
Figure 16 Installing the
switch using front mounting brackets and a rack shelf
(1) Front mountin
bracket (2) Front square-holed bracket
Installing the switch by using front mounting brackets and slide
rails
1. Wear an ESD-preventive wrist strap, and verify that the rack is sturdy and properly grounded.
2. Use the screws packed with the front mounting brackets to attach the front mounting brackets to
both sides of the switch. See Figure 9.
3. Attach the slide rails to both sides of the rack with M5 self-tapping screws. (See Figure 17. This
figure is for reference only and may differ from the actual installation on your rack and slide rails.)
To Next Page
Loading...
