EasyManua.ls Logo

HP 830 - Port-based VLAN configuration commands; display port

HP 830
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40
Technical specifications
Table 12 Technical specifications
Item Specification
Console port One, 9600 bps (default) to 115200 bps
Ethernet port 24 10/100/1000 Base-T autosensing Ethernet ports
SFP port Two 1000Base-X SFP ports
Uplink module slot 2
Memory
Controller engine—512 MB DDR2
Switching engine—128 MB DDR2
Flash
Controller engine—1 GB
Switching engine256 MB
Dimensions (H × W × D) (without rubber feet and
mounting brackets)
43.6 × 440 × 429 mm (1.72 × 17.32 × 16.89 in)
Weight 7.2 kg (15.87 lb)
AC power supply
Rated voltage range: 100 VAC to 240 VAC @ 50 Hz or 60
Hz
DC power supply Rated voltage range: –52 VDC to –55 VDC.
PoE power 30 W at most for each port
System power consumption (with no PoE device)
53 W to 90 W
Operating temperature 0°C to 45°C (32°F to 113°F)
Relative humidity (noncondensing) 5% to 95%
Transceiver module specifications
Table 13 SFP-GE-SX-MM850-A specifications
Item Specification
Central wavelength 850 nm
Transmission distance 550 m (1804.46 ft)
Transmission rate 1250 Mbps
Connector type Duplex LC
Fiber mode MMF
Transmit power –9.5 to 0 dBm
Receive sensitivity –17 dBm
Saturation –3 dBm

Table of Contents

Other manuals for HP 830

Related product manuals