HP 83522A

CHANGE 6
This change replaces the A10 Mother Board and several of its cables.
Page 6-18, Table 6-3:
Change A10 BOARD ASSEMBLY-MOTHER to HP and
Mfr. Part Number 83522-60062, CD 1.
Change
A10J2 to Part umber 1251-6952, CD 7.
Change
A10J3 to Part Number 1251-6343, CD 0.
Change A10J4 to Part Number 1251-7784, CD 5.
Add
AlOJ6,1250-0257, CD 1, CONNECTOR-RF SMB M PC 50-OHM.
Add AlOW3,8159-0005, CD 0, WIRE 22AWG W PVC 1x22 80C.
Page 6-20, Table 6-3:
Add W 1,83592-60021, CD 6, CABLE ASSY-EXT ALC.
Add
W1,83592-60024, CD 9, CABLE ASSY-EXT ALC (OPT. 004).
Change W3 CABLE ASSY-RIBBON, FRONT PANEL to Part Number 83592-60025, CD 0.
Change W3 CABLE ASSYdRIBBON, FRONT PANEL (OPT. 004) to Part Number 83592-60025, CD 0 (same as
standard instrument).
Change W5 WIRE ASSEMBLY-RF PATH to Part Number 83522-60067, CD 6.
Change W12 CABLE
ASSY-FM OUTPUT to Part Number 83525-60069, CD 1.
Change W31 CABLE
ASSY-POWER SUPPLY to Part Number 83525-60066, CD 8.
Under OPTION
004, change W3 to Part Number 83592-60025, CD 0.
Under OPTION 004, add W1,83592-60024, CD 9, CABLE ASSY-EXT ALC (OPT. 004).
Page 8-63, A7P1 Pin 110 Table:
Change Pin 6 to No Connection.
Change Pin 39 to HI FREQ
FM, A5P1, NOT USED.
Page 8-72, Figure 8-68:
Replace Figure 8-68 with
Figure 8-68. A10 Motherboard Component Locations (CHANGE 6) from this docu-
ment.
Page 8-74, Table 8-13:
At the cross-reference of
HI FREQ FM and Marker A7P1, add 39.
Page 8-77, Table 8-13:
Replace
Table 8-13. 83522A Motherboard Wiring List (5 of 5) with P/O Table 8-13. 83522A Motherboard
Wiring List (5 of 5)
(CHANGE 6) in this document.
Page 8-78, Table 8-14:
Add
W1 Cable Assembly, Coax, EXT ALC: AlOJ6-Motherboard, and J2-Front Panel.
CHANGE 6
6- 1/6-2