HP 8559A - 5-13. Related Adjustments; 5-15. Factory Selected Components

ADJUSTMENTS
MODEL
8559A
5 - 13. RELATED ADJUSTMENTS
5- 14. These adjustments should be performed
when the troubleshooting information in Section
VIII indicates that an adjustable circuit is not operat-
ing correctly. Perform the adjustments after repair or
replacement of the circuit. The troubleshooting pro-
cedures and Table 5-2 specify the required adjust
-
ments.
5 - 15. FACTORY SELECTED COMPONENTS
5 - 16. Table 5-3 is a list of factory selected compo -
nents used in the HP 8559A. The components are
listed by reference designator, related adjustment
paragraph, and by basis of selection. Factory
selected components are identified by an asterisk
(*)
in the schematic diagrams in Section VIII and in the
Replaceable Parts list in Section
VIII. Part numbers
for standard values of selected components are listed
in Table
5 - 4.