HP 8559A - 1-14

GENERAL INFORMATION
TABLE 1-4.
RECOMMENDEDTEST EQUIPMENT(1 OF 4)
MODEL
8559A
Instrument
Display Mainframe
Sweep Oscillator
RF Plug
- In
Comb Generator
Spectrum Analyzer
Synchronizer
Critical Specifications
HP 180 Series with Variable Persistence
Mainframe for RF Plug
- Ins below.
External Sweep
Adjustable Sweep range (Marker Sweep)
Compatible with mainframe above.
Output Frequency: 0.01 to 2.4 GHz
Output Amplitude : 0 to +10 dBm adjustable
FM and Phase Lock
Internal and External leveling
(both crystal detector and power meter)
Compatible with mainframe above.
Output Frequency:
2 to 21 GHz
Output Amplitude:
Band
I, 0 to + 10 dBm adjustable
Band 2,0 to
+I0 dBm adjustable
Band 3,0 to
+3 dBm adjustable
Band 4,0 to
+3 dBm adjustable
FM and Phase Lock
Internal and External leveling
(both crystal detector and power meter)
Output Frequency: 21.4 MHz and 321.4 MHz
Output Amplitude:
- 40 to 0 dBm adjustable
Output Frequency: 1 Hz to
1 MHz adjustable
Output Amplitude:
0 to 15V p - p adjustable
Triangle
- Wave Output
1 MHz comb teeth to 3 GHz
100 MHz comb teeth to 21 GHz
Frequency Range: 20 MHz to 6 GHz
Maximum Input Level: >O dBm
Amplitude Scale : Log 10 dB/DIV and 1 dB/DIV
Minimum Resolution Bandwidth: G300 kHz
Adjustable Reference Level
Input Frequency:
2 1.4 MHz
Sensitivity:
6 MHz/Volt
Error Voltage Output Polarity:
+ and - Selectable
Recommended
Model
Use*
*P = Performance Test; A = Adjustments; T = Troubleshooting
' Option H08 extends the frequency range of the standard HP 86290B from 18.6 GHz to 22 GHz. A standard
(18.6 GHz) may be used if Option H08 (22 GHz) is not available.
20ption H10 changes input frequency to 21.4 MHz and adds error voltage output polarity selection capability.