HP 8560E - Figure 3-7 Placing the CRT into the Front Frame

166 Chapter3
Assembly Replacement
Procedure 2B. A1 Front Frame/A18 CRT (8560E)
2. Gently place the A18 CRT assembly into the A1 front frame
assembly as illustrated in Figure 3-7 on page 166.
3. Place the front frame and CRT assemblies into the spectrum
analyzer, using caution to avoid pinching any cables.
4. Dress the A18W1 trace-align wires between the CRT assembly
mounts and the A6 power supply top shield.
Figure 3-7 Placing the CRT into the Front Frame