Chapter 1 25
General Information
Introduction
How to Use this Guide
Chapters 1 through 5 contain adjustments and parts information that
can be used to help you fix problems.
Chapter 6, “General Troubleshooting”, can be used to isolate the
location of a problem to a board or to a functional area in the spectrum
analyzer.
Chapters 7 through 13, which cover functional areas, can then be used
to help you localize the problem further.
Conventions followed in this guide:
Documentation Outline
HP 8560 E-Series Spectrum Analyzer Calibration Guide and HP
8560 EC-Series Calibration Guide
• Tells you how to run verification software.
• Tells you what your spectrum analyzer’s specifications are.
• Tells you how to test your spectrum analyzer.
HP 8560 E-Series and EC-Series User’s Guide
• Tells you how to make measurements with your spectrum
analyzer.
• Tells you how to install your spectrum analyzer.
• Tells you how to program your spectrum analyzer.
HP 8560 E-Series and EC-Series Spectrum Analyzer Quick Reference
Guide
• Provides an abbreviated version of the HP 8560 E-Series and
EC-Series Spectrum Analyzer’s User’s Guide.
• Provides you with a listing of all remote programming commands.
HP 8560 E-Series Spectrum Analyzer Component Level Information
• Provides schematics, component location diagrams, and parts
lists for the instrument.
Screen Text This font indicates text displayed on the screen
Key This font indicates a softkey or a front panel key
HP 8560E/EC This term is used to refer to both HP 8560 E-series
and HP 8560 EC-series instruments
To Next Page
Loading...
