HP 8712ES - Expanding the Displayed Measurement

4-52 ES User’s Guide
Using Instrument Functions
Customizing the Display
Expanding the Displayed Measurement
Normally, the displayed measurement is limited in size due to the
softkey menu and the surrounding annotation. The expanded display
feature removes these size-limiting factors, with the exception of
annotation inside the normal graticule, and expands the display to the
full screen size. The remaining annotation is enlarged for better
readability.
To use the expanded display feature, follow the steps below.
1. Press .
2. Press .
At this point, and until you turn the expand mode off with the
key, the key is used to toggle between
the expanded display and the normal display.
NOTE Because the key also functions as the “entry off” key, it may be
necessary to press twice.
The following figures illustrate the difference between a normal display
and an expanded display.
DISPLAY
More Display
Expand ON off
ENTER
Expand on OFF
ENTER
ENTER
ENTER