ES User’s Guide 4-69
Using Instrument Functions
Connecting and Configuring Printers and Plotters
Select an Appropriate Interface Cable
If your peripheral is to be connected to HP-IB, choose one of the
following cables:
• HP 10833A HP-IB Cable, 1.0 m
• HP 10833B HP-IB Cable, 2.0 m
• HP 10833D HP-IB Cable, 0.5 m
If your peripheral is to be connected via the parallel or serial port
on the analyzer, choose from the following recommended cables:
• HP C2950A Parallel Interface Cable, 2.0 m
• HP C2951A Parallel Interface Cable, 3.0 m
• HP C2946A Parallel Printer Cable, 3.0 m
• HP C2947A Parallel Printer Cable, 10.m
• HP C2913A RS-232C (Serial) Interface Cable, 1.2 m
• HP 24542G Serial Interface Cable, 3 m (9F to 25M)
If your peripheral is to be connected via the LAN port on the
analyzer, you will need a LAN hub and 2 Ethertwist cables.
Choose from the following:
• HP J2610B AdvanceStack 10Base-T Hub-8U (typical 8-port hub)
• HP J2611B AdvanceStack 10Base-T Hub-16U (typical 16-port hub)
• HP 92268A Twisted-pair "straight-through" cable, 4 m
• HP 92268B Twisted-pair "straight-through" cable, 8 m
• HP 92268C Twisted-pair "straight-through" cable, 16 m
• HP 92268D Twisted-pair "straight-through" cable, 32 m
• HP 92268N Twisted-pair "straight-through" cable, 300 m
To Next Page
Loading...
