ES User’s Guide 4-87
Using Instrument Functions
Using an External VGA Monitor
Using an External VGA Monitor
The rear panel VIDEO OUT COLOR VGA connector can be connected to
a VGA compatible monitor for enhanced measurement viewing. This
section describes how to customize the color on an external VGA monitor.
Refer to Chapter 7, “Front/Rear Panel,” for more information on the
VIDEO OUT COLOR VGA connector.
Customizing Color on an External Monitor
Although the analyzer's built-in monitor is monochrome, you can connect
an external color monitor to the analyzer for customized viewing. Your
analyzer is equipped with a standard VGA compatible connector on the
rear panel. See Chapter 7 for information on this connector.
The analyzer's default colors, selected by pressing
or ,
were chosen for optimal viewing of measurement data and text on an
external VGA color monitor. ( and
settings differ only in the colors assigned to Trace 1, Trace 2, Mem 1, and
Mem 2.) However, you can customize the color of various display items if
desired.
When importing screen images into a web browser or word processor via
the LAN interface, it is often desirable to select the inverse display
option to give plots with white backgrounds
To customize the color on an external display, press
. First, select the
item you want to change by pressing the key, and then use
the front panel knob or the keys to select the item you want
to change. You can also use the analyzer's keypad to input the number of
the item you want to change. Refer to the following table to identify item
numbers.
DISPLAY
DISPLAY
To Next Page
Loading...
