HP 8712ES - Page 24

1-8 ES User’s Guide
Installing the Analyzer
Step 2. Meet Electrical and Environmental Requirements
8. Set up a static-safe workstation. Electrostatic discharge (ESD) can
damage or destroy components.
• table mat with earth ground wire:
HP part number 9300-0797
• wrist-strap cord with 1 Meg Ohm resistor:
HP part number 9300-0980
• wrist-strap:
HP part number 9300-1367
• heel straps:
HP part number 9300-1308
• floor mat