ES User’s Guide 8-31
Hardkey/Softkey Reference
F
Softkey in the define save menu. Allows you to choose between saving
files in a format compatible with "C" model analyzers only, "A" and "B"
model analyzers only, or “E” model analyzers only.
See “Saving and Recalling Measurement Results” on page 4-55 for
more information.
Access Keys:
Softkey in the programs menu. This key is used to select how the
IBASIC program is saved to disk. It can be saved in either binary or
ASCII format.
ASCII Save a program in ASCII format for ease of
transportability. Programs saved in ASCII format
can be read by any HP BASIC computer or
instrument running IBASIC.
bin(ary) Binary format is specific to this family of analyzers
(HP 8712ES and HP 8714ES). A program saved in
binary format is not readable by an IBASIC
computer or other instruments running IBASIC.
Binary format, however, is required if you are going
to use the LOADSUB keyword.
See the Instrument BASIC User's Handbook Supplement for more
information on saving programs.
Access Keys:
Softkey in the menu. Displays the menu to rename,
delete, or copy files, to format a disk or memory, and to change or make
directories.
See “Other File Utilities” on page 4-63 for more information.
Softkey in the menu. Sets up the analyzer for S
11
or S
21
measurements of filters.
See “Using the BEGIN Key to Configure Measurements” on page 3-16
for more information.
SAVE RECALL
SAVE RECALL
SAVE RECALL
BEGIN
To Next Page
Loading...
